Carefully slide the front part of the mount over the seatpost from below. Gently moving it back and forth helps position the mount precisely—this is normal and part of the snug fit. Depending on the seatpost, you may need to spread the mount slightly more when putting it on. This is not a problem—the mount is made of durable ASA plastic and can easily withstand this.
Mounting the front part
Tighten the mount securely
Press both halves of the mount together and insert the screws. Tighten them evenly – maximum 2 Nm. This corresponds to light hand pressure; a torque-limiting tool is recommended.
⚠️ Important: Over-tightening can damage the mount or seatpost. Do not exceed 2 Nm.
Done – your radar mount is securely attached and protected against twisting. The foam-rubber insert provides additional grip and protects the seatpost from scratches.
Installation instructions
Step 1 – Fit the mount
Carefully slide the front part of the mount over the seatpost from below. Gently moving it back and forth helps position the mount precisely—this is normal and part of the precise fit. Depending on the seatpost, it may be necessary to spread the mount slightly wider when fitting it. This is not a problem—the mount is made of durable ASA plastic and can easily withstand this.
Step 2 – Tighten the screws
Press both halves of the mount together and insert the screws. Tighten them evenly—maximum 2 Nm. This corresponds to light hand pressure; a torque-limiting tool is recommended.
⚠️ Important: Overtightening can damage the mount or the seatpost. Do not exceed 2 Nm.
Done—your radar mount is securely attached and protected against twisting. The foam-rubber insert provides additional grip and protects the seatpost from scratches.